ANALISIS VARIASI TEKANAN GAS O₂ TERHADAP WAKTU DAN BIAYA PADA PROSES PEMBUATAN COVER RADIATOR MOTOR DENGAN BAHAN PLAT BAJA MENGGUNAKAN MESIN FIBER LASER CUTTING
Keywords:
cover radiator, waktu produksi, biaya produksiAbstract
In the industrial world, especially in the manufacturing industry, there are many technological developments that support better work processes. One of them is cutting technology or cutting machine, which has developed a lot of technology. There are more and more motorbike modifications for the use of transportation on the road or to be contested in motorbike modification competitions. One of them is the modification of the radiator cover which is most often found on motorcycles. Modification of the radiator cover using steel plate material has the advantage that it is stronger than the factory default radiator cover. This research uses an experimental method by varying the pressure of O2 gas then observing, recording and calculating research data. The purpose of this study was to determine the effect of variations in O2 gas pressure on the most optimal production time and estimate the production cost of the radiator cover for the motorcycle. From the results of observations and calculations of time and costs carried out in the radiator cover production process, it is obtained that the production time is 6.32 minutes / product and the production cost is Rp. 95.000,-/product.
Keywords: Cover Radiator, production time, production costs.
References
Ikhwan, M. 2018. Studi Kekuatan dan Kekakuan Struktur Laser Carrer dan Table pada Mesin Fiber Laser cutting akibat Beban Statis dan Beban Dinamis. Undergraduate thesis, Institute Teknologi Sepuluh Nopember.
Yusron, S. 2012. Modul 3 Pemotongan Plat, diakses tanggal 28 Juni 2022. yusronsugiarto.lecture.ub.ac.id/files/2012/10/modul-3Pemotongan-lat.pdf
Aris E.S, Mochammad Darwis, 2020. Rancang Bangun Mesin Laser Engraver and Cutter Untuk Membuat Kemasan Modul Praktikum Berbahan Akrilik. Program Studi Elektro Industri, Polteknik Elektronika Negeri Surabaya.
Achmad, T.T. 2016. Studi Tentang Kekuatan Dan Kekakuan Struktur Laser Carrier Pada Mesin Fiber Laser Cutting. Jurusan Teknik Mesin Fakultas Teknologi Industri Institut Teknologi Sepuluh Nopember.
Dewi, H.U.N. 2005. Computer Aided Design / Computer Aided Manufactur [CAD/CAM]. Fakultas Teknologi Informasi, Universitas Stikubank Semarang.
Samuel, Y.Y.M. 2020. Pengaturan Modifikasi Kendaraan Bermotor Di Indonesia . Fakultas Hukum Universitas Udayana.
Daftar Harga Listrik Per Kwh 2022 Untuk Golongan Tarif Non-Subsidi Halaman All – Kompas.Com Diakses Pada 17 Juli 13:55
Daftar Umk Jatim 2022, Kota Surabaya Paling Tinggi (Kompas.Com) Diakses Pada 17 Juli 13:02
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
