KARAKTERISTIK GENTENG KOMPOSIT POLIMER BAMBU IJUK SEBAGAI MATERIAL RAMAH LINGKUNGAN DITINJAU DARI POROSITASNYA

Imam Fahmi Dian Sukma; Dzackirendy Springfield; Fajar Indra Kusuma

doi:10.57203/jriteks.v4i1.2025.49-55

Authors

Imam Fahmi Dian Sukma Politeknik Negeri Banyuwangi https://orcid.org/0009-0005-4529-7869
Dzackirendy Springfield Politeknik Negeri Banyuwangi
Fajar Indra Kusuma Universitas Negeri Surabaya https://orcid.org/0009-0003-8587-235X

DOI:

https://doi.org/10.57203/jriteks.v4i1.2025.49-55

Keywords:

Composite Roof, Palm Fiber, Catalyst, Resin 157 BQTN, Porosity

Abstract

The rapid development and the advancement of technology require humans to strive for various kinds of innovations. One of them is the advancement in terms of building construction. A roof is an important part of a building. One of the innovations of roof covering is the use of a polymer composite roof. Polymer composite roof in this research was made by bamboo, palm fiber (ijuk), and resin 157 BQTN and catalyst. This research was objected to explore the influence of palm fiber length and the concentration of catalyst use towards porosity in a roof with composite materials and the minimum porosity produced by the optimum palm fiber length a roof with composite materials. The research employed a quantitative method by experiment approach. The variations in the research were 5 cm, 15 cm, and 30 cm of palm fiber length and the variations of catalyst concentration toward the volume of resin were 3%, 5%, and 7%. The test specimens of porosity which have 200x300x3 mm in dimension with a total of 36 samples. The results of this research showed that there was no effect on palm fiber variations and the concentration of catalyst use toward the porosity of polymer composite roof and the minimum porosity was 0.21%; optimally produced at 30 cm palm fiber length variation and 5% catalyst concentration.

References

Agam Thahir, M., Arif Nasution, M., & Bima Ridho Mutaqin, S. (2021). Strength Analysis Of Palm Fiber Composites As A Substitute Material For Fiberglass On Ship. Jurnal Perikanan Tropis, 8. http://jurnal.utu.ac.id/jptropis

Fahmi, I., Setyawan, A., & Setiawan, B. (2022). Analysis of Plain Concrete Pavement Deflection due to Swelling on Expansive Soil. International Journal on Advanced Science Engineering Information Technology, 12(6), 2544–2549. https://doi.org/https://doi.org/10.18517/ijaseit.12.6.15805

Faiz Listyanda, R., Diharjo, K., & Arifin, Z. (2023). Pengaruh Kandungan Filler Serbuk Genteng Sokka Terhadap Kekuatan Lentur Komposit Limbah Polipropilena (Vol. 17, Nomor 1).

Fakhri Hamzah, M., Wahyuni, F., Martana, B., Raya Limo, J., Limo, K., & Depok, K. (2024). Comparative Study Of Solar Radiation On Clay Roof Tiles And Teki Grass-Based HDPE Composite Roof Tiles (Vol. 26, Nomor 2).

Greson Sinaga, J., Wibawa, A., Santosa, B., & Jokosisworo, S. (2024). JURNAL TEKNIK PERKAPALAN Analisis Teknis Balok Laminasi Bambu Ori Dan Serat Ijuk Sebagai Alternatif Komponen Kapal Perikanan. Jurnal Teknik Perkapalan, 12(3), 1. https://ejournal3.undip.ac.id/index.php/naval

Hamzah, M. F., Fahrudin, F., Wahyuni, D. F., Studi, P., Mesin, T., Teknik, F., Nasional, P., Jakarta, V., & Rs, J. (2024). Pengaruh Variasi High Density Polyethylene (HDPE) dan Rumput Teki (Cyperus Rotundus L) Terhadap Radiasi Matahari Pada Genteng Komposit Polimer. Dalam Jurnal Rekayasa Mesin (Vol. 19, Nomor 2). https://jurnal.polines.ac.id/index.php/rekayasa

Hidayani, T. R., Hutajulu, P. E., Marbun, N. V. M. D., Pardede, E., Paramitha, R., & Nasution, R. S. (2024). Karakterisasi Komposit Polimer dengan Matriks Polistirena dan Bahan Pengisi dari Berbagai Limbah Pabrik Kelapa Sawit. REACTOR: Journal of Research on Chemistry and Engineering, 5(1), 8. https://doi.org/10.52759/reactor.v5i1.115

Rahman, M., Dhiya Luqyana, dan, Studi Teknologi Rekayasa Manufaktur, P., Teknik Mesin, J., Negeri Jakarta, P., & A Siwabessy, J. G. (2023). Modifikasi Mold Compression Molding untuk Aplikasi Genteng Bio-Composite. http://prosiding.pnj.ac.id

Salahudin, X., Pramono, C., Alfauzi, M. I., Widodo, S., & Hastuti, S. (2023). Serat Ijuk Sebagai Penguat Komposit Guna Meningkatkan Nilai Ketangguhan Impak.

Sudarmawan, R. G., Ahmad Haidhir Amirulloh, & Muslimin, M. (2025). Manufaktur Komposit Kuat Lentur Dari Polipropilena dan Serat Jerami Untuk Aplikasi Genteng Komposit. Jurnal Mekanik Terapan, 5(3), 153–159. https://doi.org/10.32722/jmt.v5i3.7101

Tiong Iskandar, Kartika, D., Santosa, A., & Iskandar, T. (2022). Pengaruh Penambahan Serat Kulit Bambu Dari Limbah Bekas Stagger Bekesting Terhadap Sifat Fisik Dan Mekanik Pada Genteng Beton.