PEMETAAN KARAKTERISTIK PASIR SUNGAI DI WILAYAH BANYUWANGI SELATAN
DOI:
https://doi.org/10.57203/j-riteks.v3i2.2025.51-57Keywords:
Characteristic Mapping, River Sand, South BanyuwangiAbstract
Banyuwangi Regency is a regency located at the southern coastal tip of the island of Java. Banyuwangi has abundant natural resources, especially in the southern region, one of which is river sand as a building material. This research was conducted to find out how the characteristics and quality of river sand in 6 sub-districts located in the southern region. This research uses SNI and ASTM as the basis of research, the things studied include: specific gravity, volume weight, sieve analysis, sand absorption water content, mud content, and sand moisture. The results showed that the average fineness modulus (FM) is included in the gradation zone 2 with FM values of 2.50-3.00, which is classified as moderately coarse sand. The specific gravity of sand in Pesanggaran, Gambiran, and Tegalsari 2 (North) sub-districts does not meet the standard requirements (2.4-2.7). In the volume weight test, all sand samples from seven sub-districts met the requirements. The infiltration water content varied, with the smallest value in Tegalsari 1 (east) sub-district at 1.45% and the highest value in Purwoharjo sub-district at 2.92%. Mud content was generally below 5%, except in Kecamatan Pesanggaran where it reached 5.45% (dry) and 5.30% (wet). Sand moisture in Siliragung, Bangorejo, and Tegalsari 1 (East) sub-districts met the requirement of no more than 2%. The sand cleanliness test for organic matter showed that the sand in Bangorejo sub-district was free of organic matter, while the sand in the other 6 sub-districts was indicated to contain organic matter.
References
ASTM. (n.d.). Standard Test Method for Density,Relative Density (Spesific Gravity), and Absorbtion of Fine Aggregate.
ASTM C 117 – 95. (1995). Test Method for Sieve Analysis of Fine and Coarse Aggregates, Annual Books of ASTM Standards, USA.
ASTM C 128-93. (n.d.). Standard Test Method for Density,Relative Density (Spesific Gravity), and Absorbtion of Fine Aggregate.
ASTM C 29-91. (n.d.). Standard Test Method for Bulk Density (“Unit Weight”) and Voids Aggregate. Annual Books of ASTM Standart, United States.
ASTM C 33 – 78. (1978). Standard Spesification for Concrete Aggregates, Annual Books of ASTM Standards, USA.
Kabupaten Banyuwangi Dalam Angka. (2023). Kabupaten Banyuwangi Dalam Angka Banyuwangi Regency In Figures Tahun 2023 tentang Peta Wilayah Kabupaten Banyuwangi (MAP OF BANYUWANGI REGENCY).
Qomaruddin, M. (2018). Studi Komparasi Karakteristik Pasir Sungai Dikabupaten Jepara. Jurnal Ilmiah Teknosains, 4(1), 6–10. https://doi.org/10.26877/jitek.v4i1.2283
SNI 03-1970. (1990). Metode Pengujian Berat Jenis dan Penyerapan Air Agregat Halus. Badan Standardisasi Nasional: Bandung.
SNI 03-6820. (2002). Sni 03-6820. Sni 03 6820 2002, 2002, 6820.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Nindi Anisa, Mirza Ghulam Rifqi

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.